User Manual

CHAPTER 4. REMOTE SWITCH FUNCTIONS 36
Once you have started the base layer recording, simply press the Undo
switch to close your initial loop and go straight into playback with
overdub active. Press the appropriate Loop footswitch as you nor-
mally would to close the overdub when desired and begin regular play-
back.
4.5 Instant Erase
When one or both loops are stopped, hitting Undo will trigger an
instant erase of the currently armed loop. This lets you simply leave
the unit in All mode and retain the option to clear individual loops by
pressing the Undo switch after the desired loop has been stopped.
4.6 Varispeed Remote Control Menu
For basic Varispeed functionality, see page 28.
To access the Varispeed Remote Control Menu, press and hold the
Reverse switch for 2 seconds. While in this menu a “−” is displayed
on the Multi-Segment Display. This menu remaps the functionality
of the Reverse and Undo switches to control the pitch of recorded
material. To exit this menu, press and hold the Reverse switch for 2
seconds.
A short press of Reverse decreases the pitch and increases the
length of both loops by the interval selected using the Infinity Ap-
plication.
A short press of Undo increases the pitch and decreases the length
of both loops by the musical interval selected using the Infinity Appli-
cation.