User Manual

CHAPTER 3. INFINITY RULES 31
3.16 Boot Options
Each of the footswitches can be pressed during power up to enable
and disable a specialty global setting on the Infinity Looper. These
settings are sticky and will remain set even after removing power from
the Infinity.
Auto Zero Record
Hold Loop 1 during boot to toggle Auto Zero Record.
With Auto Zero Record off (Loop 1 LED is off during boot), the MIDI
downbeat is reset on the first received note or MIDI start.
With Auto Zero Record on (Loop 1 LED is lit red during boot), the
MIDI counter is reset on the initial record of Loop 1.
This is essential if you are creating live loops using any type of tap
tempo MIDI clock source.
Mono Mixdown
Hold Loop 2 during boot to toggle Mono Mixdown.
With Mono Mixdown off (Loop 2 LED is off during boot), the Infinity
Looper outputs in stereo (Default).
With Mono Mixdown on (Loop 2 LED is lit red during boot), both
input channels run into a single output. Both Outputs 1 and 2 will
receive the mono mix of all recorded material.