User Manual

CHAPTER 3. INFINITY RULES 21
In parallel mode, Loop 1 will immediately begin playback when Loop
2 starts recording.
In series mode, Loop 1 will simply close and be ready for playback the
next time you hit the Loop 1 footswitch.
3.4 Play
When a loop has been recorded but is stopped, pressing that loop’s
footswitch will restart playback. The corresponding LED will glow
green to indicate playback.
The Play function is tied to the Arm/All setting (see page 9).
3.5 Stop
Pressing stop will stop audio playback.
The Stop function is tied to the Arm/All setting (see page 9).
Double pressing the Stop footswitch within 1 second will override the
Arm/All and Trail/Fade settings and will stop all loop audio.
3.6 Erase
To erase a loop, press and hold down the Stop footswitch.
If a loop is stopped and armed, pressing the Undo remote switch will
erase that loop.