User Manual

CHAPTER 2. ANATOMY AND FUNCTIONS 16
obey MIDI Start, Stop and Song Select, as well as CC/Note control
over every feature (complete MIDI mapping). To enable this behav-
ior, hold down the Multi Sync switch when powering up. For more
information and instructions, go to page 43.
USB
This provides a connection to a PC or MAC computer for loading and
offloading loop audio, preset management, audio routing configuration
and firmware updates. There are no drivers to install−just connect to
your computer and you’re good to go. For more information, go to
page 49.
When the USB port is connected, the Infinity boots into USB mode
and will not function as a looper until the USB is disconnected and
the pedal is rebooted. Save any loop data you wish to keep before
plugging the Infinity in via USB.
2.5 LEDs
Loop LEDs
The Loop 1 and Loop 2 footswitch LEDs share the same color coding,
and light pattern (for colorblind users).
Green Red Orange
Playback Recording Overdub
Solid Slow Flicker Quick Flicker
Both Loop 1 and Loop 2 footswitch LEDs are accompanied by a red
square Arm LED that indicates which loop is currently armed.