User Manual

CHAPTER 2. ANATOMY AND FUNCTIONS 15
Aux Out
This output contains summed mono audio of all currently playing
loops. This output is primarily intended for use as a loop only monitor
send to a drummer, bandmate or FOH mixer.
Undo
Connect a dual momentary remote switch here using a TRS (balanced
1/4”) cable (not an instrument or speaker cable!) to enable Overdub,
Undo, Redo, Reverse, and Varispeed.
We recommend the Infinity Remote: www.pigtronix.com/products/
infinity-remote-switch.
For details on how to use the remote switch, please see Remote Switch
Functions, page 34.
Expression
This is the TRS (balanced 1/4”) input for an expression pedal that
can be used for three different purposes: audio level control of both
loops simultaneously, Loop Aging, or Varispeed.
For details on how to use the Expression Pedal, see Expression Pedal
Functions, page 39.
MIDI In
This provides a connection for MIDI beat clock sync (slave), or a MIDI
controller. Infinity Looper will sync to MIDI whenever a MIDI Beat
Clock signal is preset. The Infinity Looper can also be configured to