Manual

CARE AND CLEANING
28
CARE AND CLEANING
RECEIVER:
With a clean brush remove the unburnt
powder and lubricate with a small cloth insi-
de of the receiver.
MECHANISM ASSEMBLY:
With a brush remove the unburnt powder
residue, carefully clean the parts with a soft
and clean cloth.
Using a brush slightly lubricate all metal
parts.
CARBINE REASSEMBLY
Reverse the steps in the disassembling sec-
tion.
Use a copper or aluminum brush, not steel, to
clean up the barrel of your carbine.
Use a good lubricant to ensure all parts of the
mechanism operate smoothly, and to remo-
ve the powder residue.
Firing a Carbine with oil, grease, or any
other material even partially obstructing
the barrel may result in damage to the
carbine and serious injury, death or pro-
perty damage to the shooter and those
nearby. Do not spray or apply lubricants
directly on ammunition. ALWAYS check the
barrel of your fi rearm for obstruction befo-
re loading and fi ring.
Remember, you are responsible of correct
use and maintenance of your carbine.
WARNING!!
Wholesalers, retailers or gunshops are not
authorized to carry out any repair or inter-
vention in Guarantee by account and in
the name of the Manufacturer. Only an au-
thorized service/warranty repair facility is
permitted to repair your carbine!
WARNING:
MANPUMA 206.9X146.9Amer.indd 28MANPUMA 206.9X146.9Amer.indd 28 7-07-2009 10:14:507-07-2009 10:14:50