Product Manual

2 800-658-6301
Pierce Hefty Hoist Instructions
The Pierce dump kit is a powerful machine and must be
used with extreme care. Deviang from the manual’s in-
strucons may cause personal injury. You may lose your
warranty if you do not follow the precauons and guidelines
outlined in this manual. Keep this manual in a safe place to
reference safety and installaon instrucons, maintenance
guidelines and operang recommendaons.
The owner, operator and installer must read the enre
owner’s manual before operang the dump kit.
WARNINGS
Read the installaon manual before proceeding.
Disconnect the vehicle baery before welding.
All wires must be supported by the truck frame.
Wires connected to the bed are hazardous.
When raising the bed, use an overhead hoist or body
props. Be aware, injury can occur if the bed is not
properly secured.
Only weld at the rear of the chassis frame. Do not
weld anywhere forward of the rear spring hangers in
order to prevent cracks from developing in the frame
and possible weak spots during the welding process.
Never exceed the weight limit of your equipment.
Refer to your vehicle’s owner’s manual for more
informaon.
Install a safety cut-o switch to prevent electrical
shorts.
Secure all electrical lines every 12”-16” with zip es.
Installaon of the included 150 amp breaker is
required.
p
p
p
p
p
p
p
p
p
Somemes you need more than an installaon
guide to show you how the install is done. We
hope our four part guide on YouTube will help
answer many of your quesons. If you need
extra assistance or just have a queson feel free
to call us at 800-658-6301.
Log on to
www.youtube.com/piercearrowinc
or use your QR code reader to view the
following videos of a 5T installaon:
1
View how to
begin your
installaon.
2
View how
to wire your
installaon.
3
View how to
nish your
installaon.
4
Customer
tesmonial.
TABLE OF CONTENTS
Warnings 2
Measurements 3
Package Contents 4
Installaon Instrucons 5-6
Hydraulic & Electrical Connecons 7
Warranty Informaon 8
Getting Started