User Manual

MULTIPLE BURIAL
Situation: 2 victims are carrying Pieps with Pieps Support (Pieps
DSP 5.0 or Pieps “Freeride”). Two rescuers equipped with the
Pieps safety system (Pieps Freeride; iProbe transponder; Pieps
“Tour” shovel). At rst the rescuer has no initial detection.
IMPORTANT! For the case of
multiple burial combined with
transmitting avalanche transceivers
without iProbe support, training
in and use of the search methods
developed and publicised for
all single antenna avalanche
transceivers is recommended.
iProbe
1
2
3
4
• As described above to the point of depth measurement of rst
victim.
• After successful location (acoustic target located signal by
means of Pieps iProbe), deactivate the victim’s transmitting
Pieps with iProbe Support.
• Automatically, without the need to press any buttons, the Pieps
Freeride shows the next victim on the display.
• Whilst the search for the second victim commences, the second
rescuer begins digging with a view to rst aid.
• Point location, depth measurement, digging out and recovery
of the second victim.
Display shows 2 victims
Location of the rst victim
Depth measurement with iProbe,
located avalanche transceiver
is deactivated
Automatic display of the next victim
1
2
3
4