User manual

 18
3. Illustration

Figure 4: Alignment of the laser on the base
For the adjustment you need a Allen Key of size 2 and 3. (Included
in delivery)
- Loosen the M3 Allen screw in the upper part of the bracket
- Spread the holder with the M2 Allen screw, if the star laser does
not fit in the holder.
- Put the star laser through the mount
- Rotate the laser as desired and then loosen the M2 Allen screw to
remove the spreading.
- Fix the laser, by turning the M3 Allen screw.
- Loosen the screw and adjust the angle.
- Lock the angle by tightening the screw.


Swivel stand