User manual

 17
2. Description / Functionality
Your ManyTronic® Dual-Stars Projector is equipped with a high-
power laser diode of the newest generation as well as one within the
mµ-range optical element, which it makes possible for you to project
the nightly starry sky in a so far not achieved authenticity, brilliance
and effective force on a surface. In clear air the laser radiation are
not recognizable, but only the stars dots on the floodlit surface.
However, it is for example by the use of fog possible to make the
rays visible and to obtain thus a further special optical effect.
An ideal projection result is obtained in the dark environment. At
small projection screens respectively distances the Stars Projector is
applicable also in daylight.
With the screen (figure. 3) included in delivery size and form of the
projected starry sky can be adapt within wide ranges to any
projection screen.
With the help of the base (figure. 1), the Stars Projector can be
fastened safe, align and position optimal.
Owing to a low current consumption and the high-quality laser diode
the Stars Projector is suitable for continuous operation.
By the patented optical system the Dual- Stars Projector is classified
into the laser class 1 and can be operated thus without
announcement and allowing for safety indication used safe in the
everyday life.
The power supply pack can be used with the contained adapter, to a
large extend world-wide, with supply voltages from 110 to 230 V (50-
60Hz).