Instructions

Seite | 21
STAR-PROJECTOR NANO-STARS - Low
3. ILLUSTRATION
Figure 1: Alignment of the laser on the base
• For the adjustment you need a Allen Key of size 2, 2,5 and 3. (Included in
delivery)
• Loosen the M3 Allen screw in the upper part of the bracket
• Spread the holder with the M2 Allen screw, if the star laser does not fit in
the holder.
• Put the star laser through the mount
• Rotate the laser as desired and then loosen the M2 Allen screw to remove
the spreading.
• Fix the laser, by turning the M3 Allen screw.
• Loosen the screw and adjust the angle.
• Lock the angle by tightening the screw.
Swivel stand