Instructions

Seite | 23
STAR-PROJECTOR NANO-STARS - Riko
4. STARTING OF THE STAR-PROJECTOR
1) With the supplied Mounting accessories, you can attach the mounting
plate to a wall or wood panel. The Star-Projector can be adjusted with the
help of the base in any direction. (figure. 1)
2) Insert the jack into the appropriate socket of the Star-Projector. (DC
Connector) Make sure that the plug is inserted in the socket of the star-
projector DC Connector sits.
3) Put the power supply pack plug in a 110 - 230 V (50-60Hz) power socket.
The Star-Projector is now switched on.
4) Change the projection sharpness by adjusting the aperture. (figure. 3)
DC Connector