User manual

Quick Start Guide PicoScope USB Oscilloscope

External connections

WARNING

To prevent injury or death, use only the power cord and adaptor supplied

with the product. These are approved for the voltage and plug conguration

in your country. Note that not all oscilloscopes require a power cord.

Environment

WARNING

To prevent injury or death, do not use in wet or damp conditions, or around

explosive gas or vapor.

CAUTION

To prevent damage, always use and store your oscilloscope in appropriate

environments. Further information on temperature and humidity

specications for both the storage and usage of the oscilloscope can be found

in the User’s Guide.

Care of the product

The product contains no user-serviceable parts. Repair, servicing and calibration

require specialized test equipment and must only be performed by Pico Technology or

an approved service provider. There may be a charge for these services unless covered

by the Pico ve year warranty.

WARNING

To prevent injury or death, do not use the product if it appears to be

damaged in any way, and stop use immediately if you are concerned by any

abnormal operations.

CAUTION

Do not tamper with or disassemble the oscilloscope, connectors or

accessories. Internal damage will aect performance.

CAUTION

Do not block any of the instrument’s air vents as overheating will cause

damage to the oscilloscope.

CAUTION

When cleaning the oscilloscope, use a soft cloth and a solution of mild soap

or detergent in water. Do not allow water to enter the oscilloscope casing, as

this will cause damage to the electronics inside.