User manual

Introduction2

2 Introduction

2.1

Safety information

To prevent possible electrical shock, fire, personal injury, or damage to the product,

carefully read this safety information before attempting to install or use the product.

In addition, follow all generally accepted safety practices and procedures for working

with and around electricity.

The product has been designed and tested in accordance with the European standard

publication EN 61010-1: 2010, and left the factory in a safe condition.

The following safety descriptions are found throughout this guide:

A WARNING identifies conditions or practices that could result in injury or death.

A CAUTION identifies conditions or practices that could result in damage to the

product or equipment to which it is connected.

2.1.1

Symbols

These safety and electrical symbols may appear on the product or in this guide.

Symbol

Description

Direct current.

Alternating current.

Chassis ground terminal. This symbol is now used in

place of the equipotential symbol which may appear on

older products.

Equipment protected throughout by double insulation

or reinforced insulation.

Possibility of electric shock.

Caution.

Static awareness. Static discharge can damage part(s).

IEC 61010 overvoltage category.

Do not dispose of this product as unsorted municipal

waste.