User manual

Introduction4
Copyright © 2012-2013 Pico Technology Ltd. All rights reserved.ps6000abcd.en r2
2.1.4
External connections
WARNING
To prevent injury or death, only use the power cord and adaptor supplied with
the product. These are approved for the voltage and plug configuration in your
country.
2.1.5
Environment
WARNING
To prevent injury or death, do not use in wet or damp conditions, or around
explosive gas or vapor.
CAUTION
To prevent damage, always use and store your oscilloscope in appropriate
environments.
Storage
Operating
Temperature
–20 °C to +60 °C
0 °C to +40 °C
(+20 to +30 °C for quoted accuracy)
Humidity
5% to 95% RH
(non-condensing)
5 % to 85% RH
(non-condensing)
2.1.6
Care of the product
The product contains no user-serviceable parts. Repair, servicing and calibration
require specialized test equipment and must only be performed by Pico Technology or
an approved service provider. There may be a charge for these services unless
covered by the Pico five year warranty.
WARNING
To prevent injury or death, do not use the product if it appears to be
damaged in any way, and stop use immediately if you are concerned by any
abnormal operations.
CAUTION
Do not tamper with or disassemble the oscilloscope, connectors or
accessories. Internal damage will affect performance.
CAUTION
Do not block the air vents at the back or front of the instrument as
overheating will damage the oscilloscope.
CAUTION
When cleaning the product, use a soft cloth and a solution of mild soap or
detergent in water. Do not allow water to enter the oscilloscope casing, as
this will cause damage to the electronics inside.