Manualshelf

User manual

ManualsBrandsPICO ManualsLaboratory Test EquipmentPC scope module Scope 6403C 350 MHz 8-channel 5 null 512 null 8 Bit Digital storage (DSO), Function generator,
11121314151617181920
PicoScope 6000A/B/C/D Series User's Guide 9
Copyright © 2012-2013 Pico Technology Ltd. All rights reserved. ps6000abcd.en r2
3.4
Connections
Standard oscilloscope connectors
The PicoScope 6000 Series oscilloscopes have standard BNC input and output
connectors. The channel inputs have switchable impedances of 50 or 1 M . In
high-impedance mode, they are compatible with all standard scope probes including
10:1 attenuated types. To ensure that you obtain the rated bandwidth from the scope,
we recommend that you use the compensated high-frequency probes supplied with it.
In 50 Ω mode, you can connect a signal from a 50 Ω source using a 50 Ω BNC cable
without the need for an external terminator. This creates an impedance-matched
connection for minimal reflections, losses and distortion.
CAUTION
The input voltage range is reduced to 5.5 V RMS when using 50 Ω input
mode.
Connector diagrams
Front panel: A and B models
Front panel: C and D models
A. Input channel A
B. Input channel B
C. Input channel C
D. Input channel D
E. Probe compensation output
F. LED to indicate when the oscilloscope is sampling data