Manualshelf

User manual

ManualsBrandsPICO ManualsLaboratory Test EquipmentPC scope module Scope 6403C 350 MHz 8-channel 5 null 512 null 8 Bit Digital storage (DSO), Function generator,
919293949596979899100
PicoScope 6000 Series Programmer's Guide 93
Copyright © 2009-2013 Pico Technology Ltd. All rights reserved. ps6000pg.en r9
117 PICO_ETS_NOT_AVAILABLE_WITH_LOGIC_CHANNELS - When a digital port is
enabled, ETS sample mode is not available for use.
118 PICO_WARNING_REPEAT_VALUE - Not applicable to this device.
119 PICO_POWER_SUPPLY_CONNECTED - The DC power supply is connected.
11A PICO_POWER_SUPPLY_NOT_CONNECTED - The DC power supply isn’t connected.
11B PICO_POWER_SUPPLY_REQUEST_INVALID - Incorrect power mode passed for
current power source.
11C PICO_POWER_SUPPLY_UNDERVOLTAGE - The supply voltage from the USB source
is too low.
11D PICO_CAPTURING_DATA - The device is currently busy capturing data.
11F PICO_NOT_SUPPORTED_BY_THIS_DEVICE - A function has been called that is
not supported by the current device variant.
120 PICO_INVALID_DEVICE_RESOLUTION - The device resolution is invalid (out of
range).
121 PICO_INVALID_NUMBER_CHANNELS_FOR_RESOLUTION - The number of channels
which can be enabled is limited in 15 and 16-bit modes
122 PICO_CHANNEL_DISABLED_DUE_TO_USB_POWERED - USB Power not sufficient to
power all channels.