User manual

ManualsBrandsPICO ManualsLaboratory Test EquipmentPC scope module Scope 6403C 350 MHz 8-channel 5 null 512 null 8 Bit Digital storage (DSO), Function generator,

How to...162

Copyright © 2007-2013 Pico Technology Ltd. All rights reserved.psw.en r32

8.8

How to set up a Mask Limit Test

1. Display a stable waveform in a scope view. Adjust the voltage range and timebase

so that the feature of interest fills most of the view. In this example, we are viewing a

repetitive pulse as might be found on a data bus.

2. Select the Tools > Masks > Add Masks command.