User manual

Toolbars and buttons146

7.9.2.3

Logic trigger dialog

Location:

Advanced triggering dialog > Logic button

Purpose:

sets up triggering on a combination of inputs

Applicability:

all devices with more than one active input

Input controls

There is a set of controls for each active input of the oscilloscope. The selection of

inputs depends on the model of oscilloscope in use. The selection of controls

(thresholds, hysteresis, window mode and so on) for each input also depends on the

hardware capabilities of the oscilloscope.

Channel A

Channel B

Channel C

Channel D

EXT input (if present)

AUX input (if present)

Digital inputs (mixed-signal oscilloscopes only). The controls

here are the same as those in the Digital Trigger dialog.

Check this box to include the relevant input in the Logic

Trigger condition. If the box is not checked, the input will be

ignored by the Logic Trigger.