Manualshelf

User manual

ManualsBrandsPICO ManualsLaboratory Test EquipmentPC scope module Scope 6402C 250 MHz 8-channel 5 null 256 null 8 Bit Digital storage (DSO), Function generator,
101102103104105106107108109110
Menus102
Copyright © 2007-2013 Pico Technology Ltd. All rights reserved.psw.en r32
6.8
Connect Device dialog
Location:
File > Connect Device
or plug in a new device
Purpose:
when PicoScope finds more than one available scope device, this dialog
allows you to select which one to use
See "How to change to a different device" if you wish to switch to a different scope
device later.
Procedure
Wait for a list of devices to appear. This may take a few seconds.
Select a device and click OK.
PicoScope will open a scope view for the selected scope device.
Use the toolbars to set up the device and the scope view to display your signals.
Demonstration mode
If you start PicoScope with no device connected, the Connect Device dialog
automatically appears with a 'Demo' (demonstration) device as one of the options.
This is a virtual device that you can use to experiment with the features of PicoScope.
If you select the Demo device and click OK, PicoScope adds a Demo Signal
Generator button to the toolbar. Use this button to set up the test signals from your
Demo device.