Datasheet

EXTERNAL TRIGGER INPUT PicoScope 3204A/B PicoScope 3205A/B PicoScope 3206A/B PicoScope 3207A/B
Trigger types Edge, pulse width, dropout, interval, logic, delayed
Input characteristics Front panel BNC, 1 MΩ ±1% in parallel with 13 pF ±1 pF
Bandwidth 60 MHz 100 MHz 200 MHz 250 MHz
Voltage range ±5 V, DC coupled
Overvoltage protection ±100 V (DC + AC peak)
FUNCTION GENERATOR PicoScope 3204A/B/MSO PicoScope 3205A/B/MSO PicoScope 3206A/B/MSO PicoScope 3207A/B
Standard output signals All models: Sine, square, triangle, DC voltage. B/MSO models: ramp, sinc, Gaussian, half-sine, white noise, PRBS.
Standard signal frequency DC to 1 MHz
Bandwidth > 1 MHz
Output frequency accuracy ±50 ppm ±2 ppm ±1 ppm/year
Output frequency resolution < 0.01 Hz
Output voltage range ±2 V with ±1% DC accuracy
Output voltage adjustment Signal amplitude and offset adjustable in approx. 1 mV steps within overall ± 2 V range
Amplitude flatness < 0.5 dB to 1 MHz, typical
SFDR > 60 dB, 10 kHz full scale sine wave
Connector type BNC, 600 Ω output impedance
Overvoltage protection ±10 V
Sweep modes Up, down, or alternating, with selectable start/stop frequencies and increments
AWG (B/MSO models only)
Update rate 20 MS/s 100 MS/s
Buffer size 8 kS 8 kS 16 kS 32 kS
Resolution 12 bits (output step size approx. 1 mV)
Standard signal frequency DC to 1 MHz
Bandwidth > 1 MHz
Rise time (10% to 90%) < 120 ns
SPECTRUM ANALYZER
Frequency range DC to 60 MHz DC to 100 MHz DC to 200 MHz DC to 250 MHz
Display modes Magnitude, average, peak hold
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman-Harris, Hamming, Hann, flat-top
Number of FFT points Selectable from 128 to 1 million in powers of 2
MATH CHANNELS
Functions −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, sin
-1
, cos
-1
, tan
-1
, sinh, cosh, tanh, delay
Operands A, B (input channels), T (time), reference waveforms, constants, pi
AUTOMATIC MEASUREMENTS
Oscilloscope
AC RMS, true RMS, DC average, cycle time, frequency, duty cycle, falling rate, fall time,
rising rate, rise time, high pulse width, low pulse width, maximum, minimum, peak to peak
Spectrum
Frequency at peak, amplitude at peak, average amplitude at peak, total power,
THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD
Statistics Minimum, maximum, average and standard deviation
SERIAL DECODING
Protocols I
2
C, I
2
S, SPI, RS232/UART, CAN, LIN, FlexRay
MASK LIMIT TESTING
Statistics Pass/fail, failure count, total count
DISPLAY
Interpolation Linear or sin(x)/x
Persistence modes Digital color, analog intensity, custom, or none
GENERAL
PC connection
USB 2.0 Hi-Speed USB 3.0 SuperSpeed
Use above port for best performance. All scopes are compatible with USB 1.1, USB 2.0 and USB 3.0 ports.
Power requirements Powered from USB port
Dimensions A/B models: 200 x 140 x 40 mm (including connectors). MSOs: 210 x 140 x 40 mm (including connectors).
Weight < 0.5 kg
Temperature range Operating: 0 °C to 50 °C (20 °C to 30 °C for stated accuracy). Storage: –20 °C to 60 °C.
Humidity range Operating: 5 %RH to 80 %RH non-condensing. Storage: 5 %RH to 95 %RH non-condensing.
Environment Dry locations only; up to 2000 m altitude
Safety approvals Designed to EN 61010-1:2010
EMC approvals Tested to EN61326-1:2006 and FCC Part 15 Subpart B
Environmental approvals RoHS and WEEE compliant
Software/PC requirements
PicoScope 6, SDK and example programs included.
Requires Microsoft Windows XP SP3, Windows Vista, Windows 7 or Windows 8 (Windows RT not supported).
Accessories USB cable(s), 2 probes in probe case. (MSO only: digital cable and 2 packs of 10 test clips.)
Languages (full support): English, French, German, Italian, Spanish
Languages (UI only):
Chinese (Simplified and Traditional), Czech, Danish, Dutch, Finnish, Greek, Hungarian,
Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Swedish, Turkish
PicoScope 3000 Series Specifications continued