User manual

Menus76
Copyright © 2007-2012 Pico Technology Ltd. All rights reserved.psw.en
6.5.4
Serial Decoding dialog
Location:
Tools > Serial Decoding
Purpose:
lets you choose which channels to use for serial decoding and set
other options
The following formats are supported:
I²C
CAN Bus
LIN
RS232 (UART)
SPI
Protocols table
This is where you select which channels to decode, and what serial protocol to use for
each channel. All the available channels are listed in the Channels column.
If the channel you want to use is not listed, enable it first by using the Channels
toolbar .
For each channel that you want to decode, click in the Protocols column. A drop-
down list will appear, containing all the protocols that PicoScope understands. The
list may vary depending on which version of PicoScope you are using. For multi-
channel protocols like I
2
C and SPI, select the data channel. Any other channels will
be specified later.
49
30
179
175
177
181
182
107