User manual

PicoScope 6 User's Guide 13

5.5

Scope view

A scope view shows the data captured from the scope as a graph of signal amplitude

against time. (See Oscilloscope basics for more on these concepts.) PicoScope

opens with a single view, but you can add more views by using the views menu .

Similar to the screen of a conventional oscilloscope, a scope view shows you one or

more waveforms with a common horizontal time axis, with signal level shown on one

or more vertical axes. Each view can have as many waveforms as the scope device

has channels. Click on one of the labels below to learn more about a feature.

Scope views are available regardless of which mode - scope mode or spectrum

mode - is active.