User manual

ManualsBrandsPICO ManualsLaboratory Test EquipmentPC scope module Scope 3205 MSO 100 MHz 18-channel 250 null 32 null 8 Bit Digital storage (DSO), Function gener

151

152

153

154

155

156

157

158

159

160

Toolbars and buttons146

7.10

Zooming and Scrolling toolbar

The Zooming and Scrolling toolbar allows you to move around a scope view or

spectrum view . Each button has a keyboard shortcut, as listed below.

Ctrl+S

Esc

Normal Selection tool. Restores the pointer to its normal

appearance. You can use this pointer to click buttons, drag rulers

and operate any other controls in the PicoScope window.

Ctrl+D

Hand tool. Turns the pointer into a hand ( ) that you can use to

click and drag the view to pan it vertically and horizontally when you

are zoomed in. You can also pan using the scroll bars. Press the Esc

key to return to the Normal Selection tool.

Ctrl+M

Marquee Zoom tool. This button turns the pointer into a marquee

zoom tool: . Use it to draw a box (called a marquee) on the view

and PicoScope will magnify that box to fill the view. Scroll bars will

appear, which you can drag to pan around in the view, or you can

pan by using the Hand tool (see above). Zooming in also opens the

Zoom Overview window. Press the Esc key to return to the

Normal Selection tool.

If you point to the time axis, the pointer changes into the horizontal

marquee zoom tool ( ), which restricts zooming to the horizontal

axis. This lets you zoom in by an arbitrary amount without disturbing

the vertical zoom factor.

Ctrl+I

Zoom-in tool. Turns the pointer into a zoom-in tool: . Click on

the view with this tool to zoom in to the specified location. Zooming

in also opens the Zoom Overview

window.

If you point to the time axis, the pointer changes into the horizontal

zoom-in tool ( ), which restricts zooming to the horizontal axis.

This lets you zoom in without disturbing the vertical zoom factor.

Ctrl+O

Zoom-out tool. Turns the pointer into a zoom-out tool: . Click on

the view with this tool to zoom out around the specified location.

If you point to the time axis, the pointer changes into the horizontal

zoom-out tool ( ), which restricts zooming to the horizontal axis.

This lets you zoom out without disturbing the vertical zoom factor.

Undo zoom. Returns the view to the previous zoom and pan

settings.

Ctrl+U

Zoom to full view. Resets the view to normal size. The view will no

longer have scroll bars, and panning will no longer be possible.

189

147