Datasheet

FUNCTION GENERATOR PicoScope 3204A/B/MSO PicoScope 3205A/B/MSO PicoScope 3206A/B/MSO
Standard output signals All models: Sine, square, triangle, DC voltage B/MSO models: ramp, sinc, Gaussian, half-sine, white noise, PRBS
Standard signal frequency DC to 1 MHz
Bandwidth > 1 MHz
Output frequency accuracy ±50 ppm
Output frequency resolution < 0.01 Hz
Output voltage range ±2 V with ±1% DC accuracy
Output voltage adjustment Signal amplitude and offset adjustable in approx. 1 mV steps within overall ± 2 V range
Amplitude flatness < 0.5 dB to 1 MHz, typical
SFDR > 60 dB, 10 kHz full scale sine wave
Connector type BNC, 600 Ω output impedance
Overvoltage protection ±10 V
Sweep modes Up, down, or alternating, with selectable start/stop frequencies and increments
AWG (B/MSO models only)
Update rate 20 MS/s
Buffer size 8 kS 8 kS 16 kS
Resolution 12 bits (output step size approx. 1 mV)
Standard signal frequency DC to 1 MHz
Bandwidth > 1 MHz
Rise time (10 - 90%) < 100 ns
SPECTRUM ANALYZER
Frequency range DC to 60 MHz DC to 100 MHz DC to 200 MHz
Display modes Magnitude, average, peak hold
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman-Harris, Hamming, Hann, flat-top
Number of FFT points Selectable from 128 to 1 million in powers of 2
MATH CHANNELS
Functions Arbitrary equations using: −x, x+y, x−y, x*y, x/y, sqrt, x^y, exp, ln, log, abs, norm,
sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh
Operands A, B (input channels), T (time), reference waveforms, constants, pi
AUTOMATIC MEASUREMENTS
Oscilloscope AC RMS, true RMS, DC average, cycle time, frequency, duty cycle, falling rate, fall time, rising rate, rise time, high
pulse width, low pulse width, maximum, minimum, peak to peak
Spectrum Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB,
THD plus noise, SFDR, SINAD, SNR, IMD
Statistics Minimum, maximum, average and standard deviation
SERIAL DECODING
Protocols CAN Bus, I²C, SPI, RS232/UART, FlexRay, LIN
MASK LIMIT TESTING
Statistics Pass/fail, failure count, total count
DISPLAY
Interpolation Linear or sin(x)/x
Persistence modes Digital color, analog intensity, custom, or none
GENERAL
PC connectivity USB 2.0 hi-speed (USB 1.1 and USB 3.0 compatible)
Power requirements Powered from USB port (500 mA at 5 V)
Dimensions A/B models: 200 x 140 x 40 mm (including connectors) MSOs: 210 x 140 x 40 mm (including connectors)
Weight < 0.5 kg
Temperature range Operating: 0 °C to 50 °C (20 °C to 30 °C for stated accuracy)
Humidity range 5 % to 80 % RH non-condensing
Altitude Up to 2000 m
Environment Dry locations only
Safety approvals Designed to EN 61010-1:2010
EMC approvals Tested to EN61326-1:2006 and FCC Part 15 Subpart B
Environmental approvals RoHS and WEEE compliant
Software/PC requirements PicoScope 6, SDK and example programs. Microsoft Windows XP, Windows Vista, Windows 7 or Windows 8
(Windows RT not supported)
Accessories USB cable, 2 probes in probe case. MSO only: digital cable and 2 packs of 10 test clips.
Languages (full support): English, French, German, Italian and Spanish
Languages (UI only): Chinese (Simplified and Traditional), Czech, Danish, Dutch, Finnish, Greek, Hungarian, Japanese,
Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Swedish and Turkish
PicoScope 3000 Series Specifications continued