User manual

PT-104 Screw Terminal Adapter User's Guide Pico Technology
2 DO172-1
1 Safety notices
You MUST observe the following safety notices to prevent damage to
equipment and personal injury.
DO NOT connect the adapter to any voltage source exceeding the maximum input
range of the PT-104, which is ±30 V.
DO NOT connect the adapter to a mains (line voltage or house current) electrical
supply. The high voltage will damage or destroy the equipment and may cause
serious or fatal injury.
2 Introduction
The PT-104 Screw Terminal Adapter (order code PP660) is an accessory for the Pico
Technology PT-104 Platinum Resistance Data Logger. The screw terminals allow
wires to be attached to the data logger without soldering.
The adapter is designed only for use with the PT-104 and is not guaranteed to work
with other equipment.
3 Specifications
Dimensions 59 x 18 x 15 mm (approx. 2.3 x 0.7 x 0.6 in.)
Weight 10 g nominal (approx. 0.35 oz)
Terminal wire size 2.5 mm
2
solid, 1.5 mm
2
stranded, 14-22 AWG
4 Pin numbers
The function of each pin is displayed on the case of the PT-104 and described in
detail in the PT-104 User’s Guide.
1 2 3
4