User manual

Product information10

The I/O connector pins are numbered as follows:

2.3

USB ADC-11 compatibility mode

The PicoLog 1000 Series data loggers may be used as replacements for the USB ADC-

11, an 11-channel data logger previously available from Pico Technology. The 1000

Series units have all the functions of the USB ADC-11 and some extra functions, such

as extra digital outputs , a PWM output and a sensor power output. They also

have a faster USB interface and more advanced driver software.

If you use a 1000 Series unit with old versions of PicoScope and PicoLog that were

released before April 2009, then it will automatically emulate a USB ADC-11. You can

continue to use the unit as an USB ADC-11 if you wish, or you can upgrade your

software to enable the extra functions of the new unit.

9 9