User manual

Product information8
Copyright © 2009 Pico Technology Ltd. All rights reserved.pl1000.en
2 Product information
2.1
Specifications
PicoLog 1012
PicoLog 1216
Maximum sampling rate
continuous streaming
block mode
[1]
100 kS/s single-channel
1 MS/s single-channel
Buffer size
8k samples, shared by all channels
Analog inputs
12
[2]
16
[2]
analog bandwidth (-3 dB)
DC to 70 kHz
input type
Single-ended, unipolar
input voltage range
0 to +2.5 V
linearity (at 25 °C)
1 LSB
resolution
10 bits
12 bits
accuracy
1%
0.5%
overload protection
±30 V to ground
input coupling
DC
input impedance
1 MW
Digital outputs (D0...D3)
2
4
[2]
Digital outputs (PWM )
period
duty cycle
None
1
100 ms to 1800 ms
adjustable from 0% to 100% in 1% steps
Digital outputs (all)
logic low voltage
logic high voltage
current limiting
100 mV (typical)
3.3 V
1 kW resistors in series with outputs
Power output for sensors
2.5 V @ 10 mA, current-limited
Ground fault current protection
0.9 A thermal self-resetting fuse
I/O connector
25-way D female
Environmental operating
conditions
for quoted accuracy
general operation
relative humidity
20°C to 50°C for quoted accuracy
0°C to 70°C overall
5% to 80% RH
Compliance
CE (EMC) class A emissions & immunity
FCC emissions
PC connection
USB 2.0
Dimensions
45 mm x 100 mm x 140 mm
(1.77" x 3.94" x 5.51")
Weight
< 200 g (7.05 oz)
Notes:
1. Block mode is supported by PicoScope and the PicoLog 1000 Series API, but not by
PicoLog.
2. Except in USB ADC-11 compatibility mode (see I/O connections table )
11
11
11
11
11
11
11
11
11
11
10 9