User manual

USB TC-08 Help3
Copyright 2004 Pico Technology Limited. All rights reserved.
3. Click the
OK
button.
The Sampling Rate dialog box appears
4. Click the
OK
button.
The Converter details dialog box appears
5. Select
USB TC-08
from the drop-down list of converters.
The device name and serial number should appear in the USB Devices pane and the USB
enumeration progress bar gradually expands to 100%. If the progress bar does not start moving,
disconnect and reconnect the USB TC-08, then click
Refresh
6. In the USB Devices pane, select the
USB TC-08
.
If you are using more than one USB TC-08, check
the serial number on the bottom of the device so that you know which one to select from the list
7. Click the
OK
button.