User manual

USB TC-08 User's Guide 5
Copyright © 2005-2012 Pico Technology Limited. All rights reserved. usbtc08.en
5. Select USB TC-08 from the drop-down list of converters.
The device name and serial number should appear in the USB Devices pane and
the USB enumeration progress bar gradually expand to 100%. If the progress bar
does not start moving, disconnect and reconnect the USB TC-08, then click
Refresh.
6. In the USB Devices pane, select the USB TC-08. If you are using more than one
USB TC-08, check the serial number on the bottom of the device so that you know
which one to select from the list
7. Click the OK button.
The following dialog box appears
8. In the TC-08 Channels window, double-click on Channel 1 unused.
The Edit TC-08 Channel dialog box appears