User manual

Getting Started4
Copyright © 2005-2012 Pico Technology Limited. All rights reserved.usbtc08.en
2 Getting Started
2.1
Installing the driver
The driver is installed automatically when you install the PicoLog software.
Alternatively, you can download the driver from our website at http://
www.picotech.com.
2.2
Connecting the USB TC-08
Please note: do not connect the USB TC-08 until you have installed the
software and restarted your PC.
To begin using the USB TC-08, connect it to the USB port on your computer using the
cable provided. Next, connect a thermocouple to one of the thermocouple input
connectors. To complete the installation, select the USB TC-08 unit and thermocouple
type in PicoLog as follows:
1. Start up PicoLog Recorder
2. Select New Settings from the File menu.
The Recording dialog box appears:
3. Click the OK button.
The Sampling Rate dialog box appears
4. Click the OK button.
The Converter details dialog box appears