Datasheet

PicoScope
®
5000D Series oscilloscopes
PicoScope 5000D Series
Technical Specications
PicoScope 5242D
and 5242D MSO
2-channel, 60 MHz
PicoScope 5243D
and 5243D MSO
2-channel, 100 MHz
PicoScope 5244D
and 5244D MSO
2-channel, 200 MHz
PicoScope 5442D
and 5442D MSO
4-channel, 60 MHz
PicoScope 5443D
and 5443D MSO
4-channel, 100 MHz
PicoScope 5444D
and 5444D MSO
4-channel, 200 MHz
Trigger modes None, auto, repeat, single, rapid (segmented memory)
Advanced trigger types (analog
channels)
Edge, window, pulse width, window pulse width, dropout, window dropout, interval, runt, logic.
Trigger types (analog channels,
ETS)
Rising or falling edge ETS trigger available on ChA only, 8-bit mode only.
Trigger sensitivity (analog
channels)
Digital triggering provides 1 LSB accuracy up to full bandwidth of scope.
Trigger sensitivity (analog
channels, ETS)
At full bandwidth: typical 10 mV p-p
Trigger types (digital inputs) MSO models only: Edge, pulse width, dropout, interval, logic, pattern, mixed signal.
Maximum pre-trigger capture Up to 100% of capture size
Maximum post-trigger delay Zero to 4 billion samples, settable in 1 sample steps (delay range on fastest timebase of 0 – 4 s in 1 ns steps)
Trigger rearm time
8-bit, typical: 1 μs on fastest timebase
8 to 12 bit: < 2 μs max on fastest timebase
14 to 16 bit: < 3 μs max on fastest timebase
Maximum trigger rate 10 000 waveforms in a 10 ms burst, 8-bit mode
External trigger input – not MSO models
Analog trigger Yes
Connector type Front panel BNC
Trigger types Edge, pulse width, dropout, interval, logic
Input characteristics 1 MΩ || 13.5 pF ±1 pF
Bandwidth 60 MHz 100 MHz 200 MHz 60 MHz 100 MHz 200 MHz
Threshold range ±5 V
External trigger threshold
accuracy
±1% of full scale
External trigger sensitivity 200 mV p-p
Coupling DC
Overvoltage protection ±100 V (DC + AC peak)
Function generator
Standard output signals Sine, square, triangle, DC voltage, ramp up, ramp down, sinc, gaussian, half-sine
Pseudorandom output signals
White noise, selectable amplitude and offset within output voltage range.
Pseudorandom binary sequence (PRBS), selectable high and low levels within output voltage range, selectable bit rate up to 10 Mb/s
DRAFT
DRAFT