Brochure

The LEDs indicate the following signals:
• LED 1/9 485A/485B
• LED 2/10 Bus+/Bus- lines J1850
• LED 3/8/12/13 Future upgrade
• LED 4 Chassis GND (Ground)
• LED 5 Signal GND
• LED 6/14 CAN High/Low of SAE J2284
• LED 7/15 K/L Lines of ISO9141-2 and keyword 2000
• LED 11 Clock
• LED 16 Batt+ (Voltage supply)
CAN Test Box PP619 £149 $245.85 ¤180.29
The CAN Test Box allows you to connect
your PicoScope oscilloscope to the 16
pin diagnostic connector enabling you to
monitor any signals present, such as the
CAN High and Low signals. The CAN Test
Box terminal pin ports are accessible with
standard 4 mm plugs.
The CAN Test Box uses numbered backlit
LEDs which illuminate when signal data is
present on the corresponding pin of the
Data Link Connector (subject to the vehicle manufacturer’s specification). Pulsing LEDs
indicate signals alternating high and low.
The CAN Test Box is fitted with a 2.5 metre (8.2 feet) cable so that you can work in
a convenient location away from the diagnostic connector, and an additional pass-
through connector so that you can hook up your scan tool at the same time as your
scope. The box is powered by the diagnostic connector, so no batteries or mains
adaptor are needed.
CAN TEST BOX
• Accurately measure up to 500 psi / 34.5 bar
• Ultra-fast 100 µs response time
• Zoom function for enhanced analysis capabilities
• Rechargeable LiPo battery
• Integrated pressure relief / bleed-off valve
• Auto zeroing
• High noise immunity
• Temperature compensated
WPS500X pressure transducer PP652 £465 $767 ¤563
WPS500X pressure transducer kit PP939 £655 $1080 ¤795
With the uncompromising
resolution and accuracy of the
WPS500X automotive pressure
transducer, you can perform quick and
accurate pressure analysis of many
automotive systems.
WPS500X PRESSURE TRANSDUCER
PP652 PACK CONTAINS: WPS500X Pressure Transducer, Carry case, USB cable
TA081, BNC to BNC cable TA098
PP939 KIT CONTAINS: Carry case, WPS500X pressure transducer,
USB cable A male to mini 5 pin 2m, Fuel hose for WPS500X, large Schrader
Vacuum hose, Bleed hose, Exhaust adaptor, insulated cable BNC to insulated BNC 5m
Fuel hose small Schrader, Universal vacuum adaptor, Foster 2 series quick coupler
female to ⅛ NPT male, Standard compression hose, Adaptor M10 short reach,
Adaptor M12 deep reach, Adaptor M14 short reach, Adaptor M14 deep reach
The WPS5000X features an extremely fast 100 µs response rate from 0% to 90% of
full scale and sensitivity down to about 0.07 psi (5 mbar). This provides you with an
accurate representation of rapidly changing signals that span across a broad pressure
range. The product includes: