Datasheet

PicoScope 3000 Series
Deep memory
PicoScope 3000 Series oscilloscopes offer a huge buffer memory, allowing them to sustain high sampling rates across long timebases. For
example, using the 512 MS buffer the PicoScope 3206 and 3406 models can sample at 1 GS/s all the way down to 50 ms/div (500 ms total
capture time).
Powerful tools are included to allow you to manage and examine all
of this data. As well as functions such as mask limit testing and color
persistence mode, the PicoScope 6 software enables you to zoom into
your waveform by several million times. The Zoom Overview window
allows you to easily control the size and location of the zoom area.
Up to 10 000 waveforms can be stored in the segmented waveform
buffer. The Buffer Overview window then allows you to rewind and
review the history of your waveform. No longer will you struggle to
catch an infrequent glitch.
When the trace length is set to be shorter than the scope’s memory,
the PicoScope will automatically configure the memory as a circular
buffer, recording recent waveforms for review. For example, if 1
million samples are captured, up to 500 waveforms will be stored in
oscilloscope memory. Tools such as mask limit testing can then be
used to scan through each waveform to identify anomalies.
x2 000 000
x130 000
x256
x1