Datasheet

PicoScope
®
5000D Series oscilloscopes
PicoScope 5000D Series
Technical Specications
PicoScope 5242D
and 5242D MSO
2-channel, 60 MHz
PicoScope 5442D
and 5442D MSO
4-channel, 60 MHz
PicoScope 5243D
and 5243D MSO
2-channel, 100 MHz
PicoScope 5443D
and 5443D MSO
4-channel, 100 MHz
PicoScope 5244D
and 5244D MSO
2-channel, 200 MHz
PicoScope 5444D
and 5444D MSO
4-channel, 200 MHz
SFDR > 70 dB, 10 kHz full scale sine wave
Output resistance 50 Ω ±1%
Connector type BNC(f)
Overvoltage protection ±20 V
Arbitrary waveform generator
AWG update rate 200 MHz
AWG buffer size 32 kS
AWG resolution 14 bits (output step size approx 0.25 mV)
AWG bandwidth > 20 MHz
AWG rise time (10% to 90%) <10 ns (50 Ω load)
Other AWG specications including sweep modes, triggering, frequency accuracy and resolution, voltage range, DC accuracy and output characteristics are as function generator.
Probe compensation pin
Output characteristics 600 Ω
Output frequency 1 kHz
Output level 3 V peak to peak, typical
Overvoltage protection 10 V
Spectrum analyzer
Frequency range DC to 60 MHz DC to 100 MHz DC to 200 MHz
Display modes Magnitude, average, peak hold
Y axis Logarithmic (dbV, dBu, dBm, arbitrary dB) or linear (volts)
X axis Linear or logarithmic
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman−Harris, Hamming, Hann, at-top
Number of FFT points Selectable from 128 to 1 million in powers of 2
Math channels
Functions
−x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, delay, average, frequency,
derivative, integral, min, max, peak, duty, highpass, lowpass, bandpass, bandstop
Operands A, B, C, D (input channels), T (time), reference waveforms, pi, D0−D15 (digital channels), constants
Automatic measurements
Scope mode
AC RMS, true RMS, frequency, cycle time, duty cycle, DC average, falling rate, rising rate, low pulse width, high pulse width, fall time, rise time,
minimum, maximum, peak to peak
Spectrum mode Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD
Statistics Minimum, maximum, average, standard deviation