Datasheet

PicoScope
®
5000D Series oscilloscopes
PicoScope 5000D Series
Technical Specications
PicoScope 5242D
and 5242D MSO
2-channel, 60 MHz
PicoScope 5442D
and 5442D MSO
4-channel, 60 MHz
PicoScope 5243D
and 5243D MSO
2-channel, 100 MHz
PicoScope 5443D
and 5443D MSO
4-channel, 100 MHz
PicoScope 5244D
and 5244D MSO
2-channel, 200 MHz
PicoScope 5444D
and 5444D MSO
4-channel, 200 MHz
Waveform buffer (no. of
segments) when using PicoSDK
(8 bits)
250 000 500 000 1 000 000
Waveform buffer (no. of
segments) when using PicoSDK
(12 to 16 bits)
125 000 250 000 500 000
Initial timebase accuracy ±50 ppm (0.005%) ±2 ppm (0.0002%) ±2 ppm (0.0002%)
Timebase drift ±5 ppm/year ±1 ppm/year ±1 ppm/year
Sample jitter 3 ps RMS, typical
ADC sampling Simultaneous on all enabled channels.
[4]
Any number of 8-bit digital ports can be used in 15-bit and 16-bit modes without affecting the maximum sampling rate.
[5]
Shared between enabled channels, PC dependent, available sample rates vary by resolution.
[6]
Shared between enabled channels.
[7]
Driver buffering up to available PC memory when using PicoSDK. No limit on duration of capture.
Dynamic performance (typical, analog channels)
Crosstalk Better than 400:1 up to full bandwidth (equal voltage ranges).
Harmonic distortion
8-bit mode: −60 dB at 100 kHz full scale input
12 to 16-bit modes: −70 dB at 100 kHz full scale input
SFDR
8 to 12-bit modes: 60 dB at 100 kHz full scale input
14 to 16-bit modes: 70 dB at 100 kHz full scale input
Noise (on ±10 mV range)
8-bit mode: 120 μV RMS
12-bit mode: 110 μV RMS
14-bit mode: 100 μV RMS
15-bit mode: 85 μV RMS
16-bit mode: 70 μV RMS
Bandwidth atness (+0.3 dB, −3 dB) from DC to full bandwidth
Triggering (main specications)
Source Analog channels, plus: MSO models: Digital D0 to D15; other models: Ext trigger
Trigger modes None, auto, repeat, single, rapid (segmented memory)
Advanced trigger types (analog
channels)
Edge, window, pulse width, window pulse width, dropout, window dropout, interval, runt, logic
Trigger types (analog channels,
ETS)
Rising or falling edge ETS trigger available on ChA only, 8-bit mode only
Trigger sensitivity (analog
channels)
Digital triggering provides 1 LSB accuracy up to full bandwidth of scope