Datasheet

______________________________________________________________

_______________________________________________________________

Read all instructions completely before using this

product.

To avoid electric shock:

• Use caution during installation and use of this product; high

voltages and currents may be present in circuit under test.

• This product must be used only by qualified personnel practising

applicable safety precautions.

• Wear protective clothing and gloves as required.

• Do not install this product on live conductors.

• Always de-energise circuit under test before installing flexible

measuring head. Always inspect the electronics unit, connecting

cable, and flexible probe for damage before using this product.

• Do not use product if damaged.

• Always connect electronics unit to display device before

installing the flexible measuring head.

• Never change batteries while measurement head is installed on

conductor.

• Never connect or disconnect the external power supply while the

measurement head is installed on a conductor.

• Never connect the output to any equipment with a common

mode voltage to earth greater than 30 volts.

• Always wear protective clothing and gloves if hazardous live

parts are present in the installation where the measurement is

carried out.

• If the probe is used in a manner not specified by the

manufacturer the protection provided by the equipment may be

impaired.