Datasheet

PicoScope 2000 Series
Detailed specifications: mixed-signal oscilloscopes
PicoScope
2205A MSO
PicoScope
2206B MSO
PicoScope
2207B MSO
PicoScope
2208B MSO
VERTICAL (ANALOG INPUTS)
Input channels 2 2
Bandwidth (–3 dB) 25 MHz 50 MHz 70 MHz 100 MHz
Rise time (calculated) 14 ns 7 ns 5 ns 3.5 ns
Software lowpass filter Not applicable Configurable software lowpass filter
Vertical resolution 8 bits 8 bits
Enhanced vertical resolution Up to 12 bits Up to 12 bits
Input ranges
±20 mV, ±50 mV, ±100 mV,
±200 mV, ±500 mV,
±1 V, ±2 V, ±5 V, ±10 V, ±20 V
±20 mV, ±50 mV, ±100 mV, ±200 mV, ±500 mV,
±1 V, ±2 V, ±5 V, ±10 V, ±20 V
Input sensitivity
4 mV/div to 4 V/div
(10 vertical divisions)
4 mV/div to 4 V/div (10 vertical divisions)
Input coupling AC / DC AC / DC
Input connector Single-ended, BNC(f) Single-ended, BNC(f)
Input characteristics 1 MΩ ± 1% ∥ 16 pF ± 1 pF 1 MΩ ± 1% ∥ 16 pF ± 1 pF
Analog offset range
(vertical position adjustment)
±250 mV (20 mV to 200 mV ranges)
±2.5 V (500 mV to 2 V ranges)
±25 V (5 V to 20 V ranges)
±250 mV (20 mV to 200 mV ranges)
±2.5 V (500 mV to 2 V ranges)
±25 V (5 V to 20 V ranges)
Analog offset control accuracy
±1% of offset setting, additional to
basic DC accuracy
±1% of offset setting, additional to basic DC accuracy
DC accuracy ±3% of full scale ±200 μV ±3% of full scale ±200 μV
Overvoltage protection ±100 V (DC + AC peak) up to 10 kHz ±100 V (DC + AC peak) up to 10 kHz
VERTICAL (DIGITAL INPUTS)
Input channels 16 (two 8-bit ports) 16 (two 8-bit ports)
Input connector 2.54 mm pitch, 10 x 2 way connector 2.54 mm pitch, 10 x 2 way connector
Maximum input frequency 100 MHz (200 Mb/s) 100 MHz (200 Mb/s)
Minimum detectable pulse width 5 ns 5 ns
Input impedance
200 kΩ ±2% ∥ 8 pF ±2 pF 200 kΩ ±2% ∥ 8 pF ±2 pF
Input dynamic range ±20 V ±20 V
Threshold range ±5 V ±5 V
Threshold grouping
Two independent threshold controls.
Port 0: D0 to D7, Port 1: D8 to D15
Two independent threshold controls.
Port 0: D0 to D7, Port 1: D8 to D15
Threshold selection TTL, CMOS, ECL, PECL, user-defined TTL, CMOS, ECL, PECL, user-defined
Port threshold accuracy ±350 mV (inclusive of hysteresis) ±350 mV (inclusive of hysteresis)
Hysteresis < ±250 mV < ±250 mV
Minimum input voltage swing 500 mV pk-pk 500 mV pk-pk
Channel-to-channel skew 2 ns, typical 2 ns, typical
Minimum input slew rate 10 V/µs 10 V/µs
Overvoltage protection ±50 V ±50 V