Datasheet

ManualsBrandsPico Technology ManualsOscilloscopesPC Oscilloscope, 8x 20MHz, 40MSPS

HIGH-PRECISION PC OSCILLOSCOPE

www.picotech.com

High-performance arbitrary waveform generator

SuperSpeed USB 3.0 interface

Split-screen waveform viewing

Low sine and pulse distortion

Advanced digital triggers

Serial bus decoding

256 MS BUFFER MEMORY • LOW COST • PORTABLE

Power supply start sequencing

7-channel audio systems

Multi-sensor systems

Multi-phase drives and controls

General-purpose and precision testing

Complex embedded system development

±10 mV to ±50 V

input ranges

12 bit

vertical resolution

80 MS/s

AWG update rate

DC accuracy

APPLICATIONS

20 MHz

bandwidth

10 000 segment

waveform buffer

80 MS/s

sampling rate

14 bit

resolution AWG

PicoScope

4824

8 CHANNELS • 12 BIT RESOLUTION

Summary of content (10 pages)

PAGE 1
PicoScope 4824 ® HIGH-PRECISION PC OSCILLOSCOPE 8 CHANNELS • 12 BIT RESOLUTION 256 MS BUFFER MEMORY • LOW COST • PORTABLE High-performance arbitrary waveform generator SuperSpeed USB 3.
PAGE 2
PicoScope 4824 8 Channel Oscilloscope 8 channel oscilloscope The PicoScope 4824 is a low cost, portable solution for multi‑input applications. APPLICATIONS Power measurements With 8 high-resolution analog channels you can easily analyze audio, ultrasound, vibration, power, and timing of complex systems, and perform a wide range of precision measurement tasks on multiple inputs at the same time.
PAGE 3
PicoScope 4824 8 Channel Oscilloscope Split-screen display The PicoScope 6 software can display up to 16 scope and spectrum views at once, making comparisons and analysis even clearer. The split-screen display can be customized to show whichever combination of waveforms you need, to display multiple channels or different variants of the same signal. As the example above shows, the software can even show both oscilloscope and spectrum analyzer traces at once.
PAGE 4
PicoScope 4824 8 Channel Oscilloscope Color persistence modes Automatic measurements PicoScope allows you to automatically display a table of calculated measurements for troubleshooting and analysis. Using the built-in measurement statistics you can see the average, standard deviation, maximum and minimum of each measurement as well as the live value. You can add as many measurements as you need on each view. Each measurement includes statistical parameters showing its variability.
PAGE 5
PicoScope 4824 Channel Oscilloscope 2000 8 Series Oscilloscopes Serial decoding The PicoScope 4824 includes serial decoding capability across all 8 channels as standard. The decoded data can be displayed in the format of your choice: In view, In window, or both at once. • In view format shows the decoded data beneath the waveform on a common time axis, with error frames marked in red. These frames can be zoomed to investigate noise or distortion.
PAGE 6
PicoScope 4824 8 Channel Oscilloscope Digital triggering Mask limit testing Most digital oscilloscopes still use an analog trigger architecture based on comparators. This can cause time and amplitude errors that cannot always be calibrated out. The use of comparators often limits the trigger sensitivity at high bandwidths and can also create a long trigger re-arm delay. PicoScope allows you to draw a mask around any signal with user-defined tolerances.
PAGE 7
PicoScope 6 Software PicoScope: The display can be as simple or as detailed as you need. Begin with a single view of one channel, and then expand the display to include up to eight live channels, math channels and reference waveforms. Tools > Serial decoding: Decode multiple serial data signals and display the data alongside the physical signal or as a detailed table. Tools > Reference channels: Store waveforms in memory or on disk and display them alongside live inputs.
PAGE 8
PicoScope 4824 8 Channel Oscilloscope Specifications AT A GLANCE Model Input channels Bandwidth (−3 dB) Maximum sampling rate Buffer memory Arbitrary waveform generator 8 20 MHz 80 MS/s 256 MS 80 MS/s PicoScope 4824 DETAILED SPECIFICATIONS VERTICAL Input channels Connector type Bandwidth (−3 dB) Rise time (calculated) Vertical resolution Software-enhanced vertical resolution Input ranges Input sensitivity Input coupling Input characteristics DC accuracy Analog offset range (vertical position adj
PAGE 9
PicoScope 4824 8 Channel Oscilloscope Specifications continued...
PAGE 10
Pack contents • PicoScope 4824 oscilloscope • USB 3.0 cable 1.8 m • USB 2.0 cable 1.8 m, double-headed • Quick Start Guide • Software and reference CD Input channels A to H Optional accessories Passive voltage probe 60 MHz x1/x10 MI007 Active differential probe 25 MHz x10/x100, ±700 V CAT III TA041 Active differential probe 25 MHz x20/x200, ±1400 V CAT III TA057 Optional power supply PS008 For use with the TA041 and TA057 active differential probes.