Brochure

PP066 Reed Switch
The reed switch sensor can be used to detect
the presence of a magnetic field such as from
a bar magnet or an electromagnet. Alternatively,
a simple external switch can be wired to the
internal screw terminals. It has a fast response
time of 2 ms so can be used as an alternative to
a light gate for timing applications. Other uses include monitoring the
amount of time a door is left open or a machine running.
Price: £20 (approx $33 / €24)* including cable and magnet
PP266 600 A AC/DC Current Clamp
This high amp probe is a 600 A current
clamp with a shielded cable for superior
noise rejection.
The PP266 is terminated in a BNC
connector and so can be connected
directly to DrDAQ.
Price: £99 (approx $163 / €120)*
External Sensors and Probes Available Kits and Contents
USB DrDAQ
The USB DrDAQ is available as a single unit or as part of a kit.
These are detailed below:
USB DrDAQ - PP706
• USB DrDAQ
• Software CD
• USB Installation Guide
• Cable: USB2 1.8m blue
•
USB DrDAQ pH Logger Kit - PP716
• USB DrDAQ
• pH Electrode
• DrDAQ 2m temperature sensor
• Software CD
• USB Installation Guide
• Cable: USB2 1.8m blue
•
USB DrDAQ 2011 Data Logging Kit - PP707
• USB DrDAQ
• pH Electrode
• 2 DrDAQ 2m temperature sensors
• DrDAQ Humidity Sensor
• Software CD
• USB Installation Guide
• 3m sensor extension cable
• Scope probe x1/x10 switchable
• Cable: USB2 1.8m blue
External Sensors and Probes
While my DrDAQ unit comes with many built-in sensors, the optional sensors and
probes detailed on these pages enable many other measurements to be taken,
therefore allowing further experiments to take place! The kits mentioned above
include some of the sensors and probes mentioned in this section, so why not take
a look?
*Prices are correct at the time of publication. Please contact Pico Technology for the latest prices before ordering.