Brochure

DD100 Temperature Sensor
A high-accuracy general purpose
temperature sensor with a
2 metre lead. Suitable for air,
surface or liquid measurements.
Range -10 °C to +105 °C (14°F to +221°F)
Resolution (at 25°C) 0.1 °C (0.18 °F)
Accuracy (at 25°C) 0.3 °C (0.54 °F)
Price £15 (approx $25 / €18)*
DD011 pH Electrode
The Pico pH sensor is a robust
epoxy bodied pH electrode ideal
for educational use. The pH sensor
consists of a standard electrode
capable of measuring the full to 0 to 14 pH range. The electrode comes
complete with a small bottle of storage solution to help prevent it drying
out.
Size 12 x 120 mm
Operating temperature 0 to 60 °C (32 °F to +140 °F)
Resolution 0.02 pH
Price £35 (approx $58 / €42)*
PP163 Humidity Sensor
The Humidity Sensor measures
humidity using a ‘non-condensing’
technique. It has a short response time
and plugs into the external sensor
connections of USB DrDAQ.
Size 72 x 45 x 28 mm
Operating range 20% - 90% Relative Humidity
Overall accuracy Reading ± 10%
Operating temperature 0 - 60 °C (32°F to +140°F)
Resolution 0.2% Relative Humidity
Minimum response time 60 seconds with vigorous air
movement
Accuracy (at 25°C) 60 minutes in still air
Price £49 (approx $81 / €59)*
DD103 Oxygen Sensor
The DD103 Oxygen Sensor is used to measure
the percentage of oxygen in a gas. The sensor
plugs into the external sensor sockets of
USB DrDAQ using the supplied cable.
Sensor Type Galvanic Cell (lead-oxygen with
weak acid electrolyte)
Input Range 0 to 100% oxygen
Accuracy (Calibrated) ±3.0% over operating conditions
range
Response Times < 15 seconds for 90% response
< 25 seconds for 97% response
Humidity 0 to 95% Non-condensing
Operating Temperature 5 °C to 40 ° C (41 °F to +104 °F)
Storage Temperature -15 °C to 50 ° C (5 °F to +122 °F)
Price £99 (approx $163 / €120)*
MI007 Scope Probe
This high quality general purpose oscilloscope
probe has a 60 MHz bandwidth. A two position
slide switch allows attenuation of either x1 or
x10 to be selected.
x1 x10
Attenuation 1:1 10:1
Bandwidth DC to 15 MHz DC to 60 MHz
Rise time 23.3 ns 5.8 ns
Input resistance 1 MΩ 10 MΩ
Input capacitance 46 pF plus oscilloscope Approx 15 pF
Cable length 1.2 m (approx 4ft)
Price £15 (approx $25 / €18)*
Magnetic Induction Kit
Over 170 years ago British scientist
Michael Faraday discovered electromagnetic
induction - the “induction” or generation of
electricity in a wire by means of the
electromagnetic effect of a current in
another wire. Now with the Pico Magnetic Induction Kit and a DrDAQ
data logger you too can perform your own electromagnetic induction
experiments
Price: £34.95 (approx $58 / €42)*
External Sensors and Probes
USB DrDAQ
As well as the built-in sensors, USB DrDAQ has sockets for optional external sensors. When a sensor is plugged into the external sensor sockets, the
software detects it and automatically scales readings. For example, if a temperature sensor is plugged in, readings are displayed in °C, or if a humidity
sensor is plugged in, readings are displayed in % RH.
*Prices are correct at the time of publication. Please contact Pico Technology for the latest prices before ordering.