User Manual

PicoScope 4000 Series User's Guide 3

2.3

FCC notice

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his or her own

expense.

For safety and maintenance information see the safety warning.

2.4

CE notice

The PicoScope 4000 Series PC Oscilloscopes meet the intent of the EMC directive

2004/108/EC and have been designed to EN61326-1 (2006) Class A Emissions

and Immunity standard.

PicoScope 4000 Series PC Oscilloscopes also meet the intent of the Low Voltage

Directive 2006/95/EC and have been designed to meet the BS EN 61010-1:2001

IEC 61010-1:2001 Safety requirements for electrical equipment for

measurement, control, and laboratory use standard.