User Manual

Programming with the PicoScope 4000 Series32

4.10.13

ps4000GetTriggerTimeOffset

PICO_STATUS ps4000GetTriggerTimeOffset

(

short handle

unsigned long * timeUpper

unsigned long * timeLower

PS4000_TIME_UNITS * timeUnits

unsigned short segmentIndex

)

This function gets the time, as two 4-byte values, at which the trigger occurred. Call

it after block-mode data has been captured or when data has been retrieved from a

previous block-mode capture.

Applicability

Block mode, rapid block mode

Arguments

handle, the handle of the required device

timeUpper, a pointer to the upper 32 bits of the time at which the

trigger point occurred

timeLower, a pointer to the lower 32 bits of the time at which the

trigger point occurred

timeUnits, see ps4000GetTriggerChannelTimeOffset.

segmentIndex, the number of the memory segment for which the

information is required.

Returns

PICO_OK

PICO_INVALID_HANDLE

PICO_DEVICE_SAMPLING

PICO_SEGMENT_OUT_OF_RANGE

PICO_NULL_PARAMETER

PICO_NO_SAMPLES_AVAILABLE