Datasheet

FUNCTION GENERATOR PicoScope 2204 PicoScope 2205 PicoScope 2206 PicoScope 2207 PicoScope 2208
Standard output signals Sine, square, triangle, DC voltage, ramp, sin(x)/x, Gaussian, half-sine
Pseudorandom output signals None White noise, PRBS
Standard signal frequency DC to 100 kHz DC to 1 MHz
Sweep modes Up, down, dual with selectable start/stop frequencies and increments
Output frequency accuracy ±100 ppm ±50 ppm
Output frequency resolution < 0.01 Hz
Output voltage range ±2 V
Output adjustments ±250 mV to ±2 V amplitude, ±1 V offset Any amplitude and offset within ±2 V range
Amplitude flatness (typical) < 1 dB to 100 kHz < 0.5 dB to 1 MHz
DC accuracy ±1% of full scale
SFDR > 55 dB @ 1 kHz full-scale sine wave > 60 dB @ 10 kHz full-scale sine wave
Output characteristics Front panel BNC, 600 Ω output impedance
Overvoltage protection ± 10 V
ARBITRARY WAVEFORM GENERATOR
Update rate 2 MS/s 20 MS/s
Buffer size 4 k samples 8 k samples
Resolution 8 bits 12 bits
Bandwidth 100 kHz > 1 MHz
Rise time (10% - 90%) < 2 µs < 100 ns
SPECTRUM ANALYZER
Frequency range DC to 10 MHz DC to 25 MHz DC to 50 MHz DC to 100 MHz DC to 200 MHz
Display modes Magnitude, average, peak hold
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman-Harris, Hamming, Hann, flat-top
Number of FFT points Selectable from 128 to half available buffer memory in powers of 2
MATH CHANNELS
Functions
+, −, *, /, sqrt, ^, exp, ln, log, abs, norm, sign, sin, cos, tan, asin, acos, atan,
sinh, cosh, tanh, derivative, integral, freq, min, max, average, peak
Operands A, B (input channels), T (time), reference waveforms, constants, Pi
AUTOMATIC MEASUREMENTS
Oscilloscope
AC RMS, true RMS, DC average, cycle time, frequency, duty cycle, falling rate, fall time,
rising rate, rise time, high pulse width, low pulse width, maximum, minimum, peak to peak
Spectrum
Frequency at peak, amplitude at peak, average amplitude at peak,
total power, THD %, THD dB, THD plus noise, SFDR, SINAD, SNR, IMD
Statistics Minimum, maximum, average and standard deviation
SERIAL DECODING
Protocols I²C, I²S, SPI, UART, CAN Bus, LIN and FlexRay.
MASK LIMIT TESTING
Statistics Pass/fail, failure count, total count
DISPLAY
Interpolation Linear or sin(x)/x
Persistence modes Digital color, analog intensity, custom, or none
GENERAL
PC connectivity USB 2.0 hi-speed (full-speed compatible)
Power requirements Powered from USB port
Dimensions (including connectors) 150 x 100 x 40 mm 200 x 140 x 40 mm
Weight < 0.22 kg (7.8 oz) < 0.5 kg (17.7 oz.)
Temperature range Operating: 0 °C to 50 °C (20 °C to 30 °C for stated accuracy). Storage: –20 °C to +60 °C.
Humidity range Operating: 5% to 80% RH non-condensing. Storage: 5% to 95% RH non-condensing.
Safety approvals Designed to EN 61010-1:2001 Designed to EN 61010-1:2010
EMC approvals Tested to EN61326-1:2006 and FCC Part 15 Subpart B
Environmental approvals RoHS and WEEE compliant
Software included PicoScope 6, Windows SDK, example programs (C, Visual Basic, VEE, Excel, LabVIEW, Delphi)
PC requirements Microsoft Windows XP, Vista, Windows 7 or Windows 8 (not Windows RT), 32 or 64-bit
Accessories USB cable
Languages (UI and manual): English, French, German, Italian, Spanish
Languages (UI only):
Chinese (Simplified), Chinese (Traditional), Czech, Danish, Dutch, Finnish, Greek,
Hungarian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Swedish, Turkish
Specifications continued...