Datasheet

PRODUCT SELECTOR
MODEL PicoScope 2204 PicoScope 2205 PicoScope 2206 PicoScope 2207 PicoScope 2208
Bandwidth 10 MHz 25 MHz 50 MHz 100 MHz 200 MHz
Sampling rate 100 MS/s
200 MS/s (ChA)
100 MS/s (ChB)
500 MS/s 1 GS/s 1 GS/s
Memory 8 kS 16 kS 24 kS 32 kS 40 kS
Function generator + AWG 100 kHz 100 kHz 1 MHz 1 MHz 1 MHz
EXT trigger No No Yes Yes Yes
DETAILED SPECIFICATIONS
VERTICAL
Number of channels
2
Bandwidth (-3 dB) 10 MHz 25 MHz 50 MHz 100 MHz 200 MHz
Rise time (calculated) 35 ns 14 ns 7 ns 3.5 ns 1.75 ns
Resolution 8 bits (12 bits with resolution enhancement)
Input characteristics BNC, 1 MΩ ∥ 20 pF BNC, 1 MΩ ±1% ∥ 13 pF ±1 pF
Input coupling AC/DC
Input sensitivity 10 mV/div to 4 V/div (10 vertical divisions)
Input ranges ±50 mV, ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V, ±10 V, ±20 V
Analog offset range
(vertical position adjustment)
None
±250 mV (50 mV, 100 mV, 200 mV ranges)
±2.5 V (500 mV, 1 V, 2 V ranges)
±20 V (5 V, 10 V, 20 V ranges)
DC accuracy ±3% of full scale
Overvoltage protection ±100 V (DC + AC peak)
HORIZONTAL
Max. sampling rate (real-time 1 ch.) 100 MS/s 200 MS/s (ChA only) 500 MS/s 1 GS/s 1 GS/s
Max. sampling rate (real-time 2 ch.) 50 MS/s 100 MS/s 250 MS/s 500 MS/s 500 MS/s
Max. sampling rate (repetitive/ETS) 2 GS/s 4 GS/s 5 GS/s 10 GS/s 10 GS/s
Max. sampling rate (streaming) 1 MS/s (typical) in PicoScope software. Rate using supplied SDK is PC-dependent.
Timebase ranges 10 ns to 5000 s/div 5 ns to 5000 s/div 2 ns to 5000 s/div 1 ns to 5000 s/div 500 ps to 5000 s/div
Buffer memory size (shared) 8 k samples 16 k samples 24 k samples 32 k samples 40 k samples
Max. buffers (normal triggering) 10,000
Max. buffers (rapid block triggering) N/A 32
Timebase accuracy ±100 ppm ±50 ppm
Sample jitter unspecified < 5 ps RMS
DYNAMIC PERFORMANCE (typical)
Crosstalk (full bandwidth) Better than 200:1 (equal ranges) Better than 400:1 (equal ranges)
Harmonic distortion < –50 dB at 100 kHz, full-scale input
SFDR > 52 dB at 100 kHz, full-scale input
Noise 1 LSB (±1 V range) < 180 µV RMS (±50 mV range)
Pulse response < 7% overshoot < 5% overshoot
Bandwidth flatness (at scope input) (+0.3 dB, –3 dB) from DC to full bandwidth
TRIGGERING
Sources Ch A, Ch B Ch A, Ch B, Ext
Modes None, auto, repeat, single None, auto, repeat, single, rapid (segmented memory)
Advanced digital triggers (Ch A, B)
Rising, falling, dual, hysteresis, window, pulse width, window pulse width, window dropout, interval, logic, delayed
Trigger types, ETS (Ch A, Ch B)
Edge
Trigger sensitivity (Ch A, Ch B) Digital triggering provides 1 LSB accuracy up to full bandwidth (ETS: typical 10 mV p-p at full bandwidth)
Max. pre-trigger capture 100% of capture size
Max. post-trigger delay 4 billion samples
Trigger re-arm time PC-dependent < 2 μs on fastest timebase
Max. trigger rate PC-dependent Burst of 32 in 64 μs
EXTERNAL TRIGGER INPUT
Trigger types
N/A
Edge, pulse width, dropout, interval, logic
Input characteristics Front-panel BNC, 1 MΩ ±1% ∥ 13 pF ±1 pF
Bandwidth 50 MHz 100 MHz 200 MHz
Threshold range ±5 V, DC coupled
Threshold accuracy ±3% of full scale
Sensitivity 200 mV p-p typical, at full bandwidth
Overvoltage protection ±100 V (DC + AC peak) up to 10 kHz
PicoScope 2000 Series Oscilloscopes - Specifications