Datasheet

SPECTRUM ANALYZER
Frequency range DC to 5 MHz
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman-Harris, Hamming, Hann, flat-top
Display modes Magnitude, peak hold, average
Number of FFT points 128 to 1 million
SIGNAL GENERATOR
Standard output signals Sine, square, triangle, DC voltage, ramp, sinc, Gaussian, half-sine, white noise, PRBS
Standard signal frequency DC to 20 kHz
Output frequency accuracy ±50 ppm
Output frequency resolution < 0.01 Hz
Output voltage range ±1 V (into high impedance load)
Offset voltage adjustment 100 μV steps (within overall ±1 V range)
DC accuracy ±0.5% of full scale
Amplitude flatness < 0.1 dB to 20 kHz, typical
SFDR 102 dB typical @ 10 kHz, −1 dBfs input
Connector type Front panel BNC
Output characteristics 600 Ω
Overvoltage protection ±10 V
Sweep modes Up, down, dual with selectable frequency and sweep time
AWG
Update rate 192 kS/s
Buffer size 4096 samples
Resolution 16 bits
Bandwidth 20 kHz
Rise time (10% to 90%) 11 μs, typical
AUTOMATIC MEASUREMENTS
Oscilloscope mode
AC RMS, true RMS, DC average, cycle time, frequency, duty cycle,
rising/falling rate, rise/fall time, high/low pulse width, maximum, minimum, peak to peak,
Spectrum mode
Frequency at peak, amplitude at peak, average amplitude at peak,
total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD
Statistics Average, standard deviation, maximum, minimum
GENERAL
PC connectivity USB 2.0 hi-speed
Dimensions 210 x 135 x 40 mm (including connectors)
Weight < 0.5 kg
Power requirements Powered from USB port
Operating temperature range 0 °C to 45 °C (20 °C to 30 °C for stated accuracy)
Storage temperature range −20 °C to +60 °C
Operating humidity range 5% to 80% RH, non-condensing
Storage humidity range 5% to 95% RH, non-condensing
Safety approvals Designed to EN 61010-1:2010
EMC approvals CE: Tested to EN61326-1:2006. FCC: Tested to part 15 subpart B
Environmental approvals RoHS and WEEE compliant
Software/PC requirements PicoScope 6, SDK and example programs. Microsoft Windows XP, Vista or Windows 7 (32-bit or 64-bit).
Languages (software and manuals) English, French, German, Italian, Spanish
Languages (software only)
Chinese (Simplified), Chinese (Traditional), Czech, Danish, Dutch, Finnish, Greek,
Hungarian, Japanese, Norwegian, Polish, Portuguese, Romanian, Russian, Swedish, Turkish
Specifications Continued...
Have you seen our PicoScope 4000 Series data sheet?
It shows the full range of features available with the PicoScope software, which
turns your PicoScope 4262 into a powerful oscilloscope and spectrum analyzer.
All of these capabilities are included in the price of your oscilloscope.
www.picotech.com