Datasheet

ManualsBrandsPico Technology ManualsOscilloscopesPC Oscilloscope, 2x 5MHz, 10MSPS

HIGH-RESOLUTION USB OSCILLOSCOPE

PicoScope

4262

A Digital Oscilloscope for the Analog World

Supplied with a full SDK including example programs • Software compatible with

Windows XP, Windows Vista and Windows 7 • Free Technical Support

Low noise

Two channels

16 MS buffer

16-bit resolution

10 MS/s sampling

5 MHz bandwidth

Advanced digital triggers

Low-distortion signal generator

Arbitrary waveform generator

USB powered

16 bit

...from a name you can trust PicoScope 4262 Oscilloscope

Summary of content (5 pages)

PAGE 1
PicoScope 4262 ® HIGH-RESOLUTION USB OSCILLOSCOPE A Digital Oscilloscope for the Analog World Low noise Two channels 16 MS buffer 16-bit resolution 10 MS/s sampling 5 MHz bandwidth Advanced digital triggers Low-distortion signal generator Arbitrary waveform generator USB powered 16 bit Supplied with a full SDK including example programs • Software compatible with Windows XP, Windows Vista and Windows 7 • Free Technical Support ...
PAGE 2
Introduction to the PicoScope 4262 Low distortion, low noise Digital triggering The PicoScope 4262 from Pico Technology is a 2-channel, 16‑bit high‑resolution oscilloscope with a built-in low-distortion signal generator. With its 5 MHz bandwidth, it can easily analyze audio, ultrasonic and vibration signals, characterize noise in switched mode power supplies, measure distortion, and perform a wide range of precision measurement tasks.
PAGE 3
PicoScope 4262 Specifications VERTICAL Number of channels Input connectors Bandwidth (-3 dB) Bandwidth limiter Rise time (calculated) Resolution Input impedance Input coupling Input sensitivity Input ranges DC accuracy (% of full scale) Overvoltage protection HORIZONTAL Sampling rate (real time 1 or 2 channels) Sampling rate (cont. USB streaming)* Buffer memory Waveform buffer (no.
PAGE 4
Specifications Continued...
PAGE 5
PicoScope 4262 Connections Trigger Input USB The rear panel of the PicoScope 4262 has two connections: a USB port for connection to the PC, and a BNC for an external trigger to be connected. Ch A Ch B AWG & Function Generator The front panel of the PicoScope 4262 has two BNC input channels and a BNC output for the function generator and AWG.