Datasheet

USB TC-08 thermocouple data logger
General (continued)
PC requirements
Windows 7, 8 or 10, 32-bit or 64-bit
macOS 10.9 (Mavericks) or later, 64-bit only
Linux (tested on OpenSUSE and Ubuntu), 64-bit only
Hardware as required by the operating system
Documentation
Quick Start Guide
User’s Guide
Programmer’s Guide
EU Declaration of Conformity
All relevant documentation is available for download from www.picotech.com/downloads
Compatible thermocouples
The TC-08 is compatible with all commonly used thermocouples, offering high accuracy without compromising acquisition speed. Thermocouple types and temperature ranges are
shown in the table below.
Type Overall range (°C) 0.1°C resolution 0.025°C resolution
B 20 to 1820 150 to 1820 600 to 1820
E –270 to 910 –270 to 910 –260 to 910
J –210 to 1200 –210 to 1200 –210 to 1200
K –270 to 1370 –270 to 1370 –250 to 1370
N –270 to 1300 –260 to 1300 –230 to 1300
R –50 to 1760 –50 to 1760 20 to 1760
S –50 to 1760 –50 to 1760 20 to 1760
T –270 to 400 –270 to 400 –250 to 400
Also measures voltage and current!
The optional TC-08 single-channel terminal board plugs into one channel on the data logger and has a set of screw terminals,
allowing you to connect sensors with voltage or current outputs to the data logger without any need for soldering. The four input
ranges (±50mV, ±500mV, ±5V and 4–20mA) allow you to measure a wide range of signals.