User Manual

ADC-20/ADC-24 User's Guide 8

6. In the Converter details dialog, set the Converter type to High Resolution

Data Logger. The device type and serial number should appear in the USB

Devices list, and the USB enumeration progress indicator should gradually

move towards 100%. If the progress indicator does not start moving, disconnect

and reconnect the unit and then press Refresh.

7. Click OK

8. At the ADC-20 (or ADC-24) channels dialog, double-click on "Channel 1":

9. At the Edit ADC-20 (or ADC-24) Channel dialog, click OK: