User Manual

USB PT-104 User's Guide 5
Copyright © 2010 Pico Technology Ltd. All rights reserved. usbpt104.en
2.3
Installing the driver
The driver is installed automatically when you install the PicoLog software.
Alternatively, you can download the driver from our website at http://www.picotech.
com.
2.4
Connection: USB port
To use the USB PT-104, connect its USB port to a USB port on your computer using
the cable provided.
The first time you connect the device, Windows will install the driver and then tell you
that the device is ready for use. You can then run PicoLog to start making
measurements.